FAQ

FAQ

Questions we hear most

Straight answers about working with a commercial architect in North Carolina, South Carolina and Texas: what to expect, how long it takes, permits, and what to do before you sign a lease.

Getting started

Do I need an architect for my commercial project?

For most commercial projects, yes. If you’re changing the use of a space (retail to restaurant, office to retail, and so on), you’ll need an architect. Each state also sets its own rules:

  • South Carolina: sealed architectural plans are required unless the building is under 3 stories and under 5,000 square feet. That exception doesn’t apply to restaurants and other gathering spaces, schools, daycares, or medical and care facilities, which need an architect at any size.
  • North Carolina: an architect is required for commercial buildings over 3,000 square feet or over $200,000 in value. Renovations that change exits, structure or loads count too.
  • Texas: privately owned commercial buildings generally need an architect over 20,000 square feet or 2 stories. Offices, schools and gathering spaces need one at a lower cost threshold, and public buildings almost always do.

Even when a seal isn’t required, your building department may still ask for code-compliant drawings. Ask us in a free consultation and we’ll tell you what your project needs.

How does the free consultation work?

Your first conversation with us is free and usually takes about 45 minutes. We’ll learn about your space, your plans, your timeline and your budget, and tell you what the next steps look like. The more information you bring to this meeting, the more we can cover, and the more chance you have to ask questions.

Some spaces are more complex. For those, we’ll walk the site with you before we send a proposal.

Should I call you before or after I sign a lease?

Before, if you can. Leases and landlord work letters can hide costs that don’t show up until it’s too late: a grease trap, a new restroom, a sprinkler system, or more electrical service than the space has.

Our free Before You Sign checklist on the Getting Started page lists the questions to ask your landlord.

What is the pre-lease retainer?

Choosing a space is a big decision, and it usually takes several calls, site walks and questions before you’re ready to sign. Many of our clients look at more than one space and call us with questions about each one. That time adds up, so we offer pre-lease guidance through a retainer.

The retainer starts at $725 and covers roughly 5 or more hours: answering your questions as they come up, reviewing the lease or landlord work letter, and walking one or more spaces with you. Larger and industrial projects may need more time, and we’ll tell you up front.

The retainer covers our time up front and makes your questions a priority while you’re deciding, instead of waiting behind projects already under contract. It also shows us you’re serious about finding the right space, so we can plan your project into our schedule as early as possible.

If you hire us for the project, the full retainer is credited to your design fee. It’s a flat amount and isn’t refundable, including any unused hours, if you decide not to move forward.

What should I bring to the first meeting?

The more you bring, the more we can cover and the better use we can make of your time.

  • Property address and suite number
  • Approximate square footage and what the space was used for before
  • Your lease, LOI or landlord work letter
  • Photos of the space, if you have them
  • Equipment list (kitchens, salons, labs, manufacturing)
  • Target opening date and budget range

Cost

How much does an architect cost?

It depends on the size of the space, how much is changing, the type of business, and what engineers are needed. After the consultation we send a proposal with a clear scope, a fee and an estimated schedule, so you know the cost before any work starts.

Is engineering included?

Most commercial projects need engineers along with the architecture: structural, plumbing, mechanical and electrical. We bring in engineers we trust, coordinate their drawings with ours, and include their fees in your proposal and invoices, so you have one contract and one point of contact.

Other consultants may be needed depending on your scope of work, such as civil engineering, geotechnical testing or a survey. These are typically hired by the client separately, but we can include them in our scope if you’d like.

What if I want changes after the drawings are done?

The schematic design phase is the time to make changes. That’s when we work out the layout with you, and revisions are part of the process.

Once the layout is approved and we move into construction drawings, changes mean redoing work that’s already done, and often the engineers’ work too. Changes after that point are an additional service, billed hourly, and we’ll tell you before the extra work starts. Please send changes by email so we both have a clear record.

Timeline and permits

How long does the design take?

A typical tenant upfit takes about 6 to 8 weeks from an approved test fit to permit-ready drawings, including engineering. A simple plan for a small space can be done in a week or two. New buildings and industrial projects take longer.

The fastest projects are the ones where decisions and information come back to us quickly. If equipment is critical to your project, the schedule depends heavily on having that information. Without it, we can’t start the engineers.

How long does the permit take?

Plan review times are set by each building department and change with how busy they are. Mecklenburg County, the City of York, Rock Hill and other jurisdictions each run on their own schedule, and restaurants usually need a separate health department review. Expect a minimum of 4 to 6 weeks for the jurisdiction to review and issue a permit. We’ll give you a current estimate for your jurisdiction when we start.

Do you handle the permit process?

Yes. We prepare the drawings and applications, submit them for plan review, answer the reviewers’ comments, and resubmit until the plans are approved. We regularly work with many jurisdictions, and each one has its own way of doing things.

Once the plans are approved, your licensed general contractor pulls the building permit and the trade permits. In North Carolina, projects of $40,000 or more need a licensed general contractor, and South Carolina requires a state contractor’s license for work over $5,000.

If you decide not to hire a general contractor: where the law allows it, you take on the contractor’s role yourself. That includes pulling permits, hiring and scheduling the trades, ordering materials, and scheduling and passing inspections. We design the space and answer questions about the drawings, but we don’t manage construction or coach you through the building process. Those questions belong with your building department or a contractor.

Working with 993

Are you a contractor? Can you build it?

No. We design your space and guide it through permitting, and a licensed general contractor builds it. We’ll partner with your contractor on design-build projects, but we don’t do the construction. Once we’re working together, we’re happy to recommend contractors we trust, and we can help you compare bids.

What kinds of projects do you do?

Commercial and industrial work, including franchises, restaurants and kitchens, retail and salons, offices, fitness studios, learning centers, warehouse and manufacturing renovations, exterior rehabs, event spaces and new pre-engineered metal buildings. We also do code analysis, feasibility studies, as-built drawings and Matterport virtual tours of existing spaces.

We focus on commercial and industrial work and don’t design single-family homes.

Can you work with franchise brand standards?

Yes. We’ve designed locations for national brands such as Smashburger, Potbelly, Sylvan Learning, The Halal Guys and others. We follow the brand’s prototype and standards and adapt them to your space and your local code.

Do I need a separate interior designer?

Usually not. Interior architecture is part of what we do: space planning, finishes, millwork and how the space works day to day. If you choose to hire an interior designer, we’re happy to coordinate with them throughout the process. We just need to know up front.

Can you measure and draw my existing space?

Yes. We field-measure existing buildings and draw as-built plans, and we can capture the space as a Matterport 3D virtual tour. It’s a good first step before you plan a renovation or market a property.

Do you help once construction starts?

Yes, through construction administration. We answer contractor questions (RFIs), review submittals, visit the site and help keep the work true to the drawings. Some proposals include a set number of hours; extra time is billed hourly.

Who will I be working with?

Lindsey Mayes, a licensed architect and the owner of 993, leads every project and seals the drawings. Our design team helps with drawings and documentation.

What areas do you serve?

We’re based in York, South Carolina, and work across North Carolina, South Carolina and Texas. Locally that includes Charlotte, Rock Hill, Fort Mill, Clover, Chester and the rest of York County.

How do changes and requests work once the project starts?

Please send requests and changes by email, even after a call or a text. It gives us both a clear record, so nothing gets missed and everyone works from the same information.

Why the name 993?

Our name is a reminder of who we work for. 993 Architecture is a Christian firm, and our faith guides how we work and how we serve our clients. Psalm 99:3: “Let them praise your great and awesome name! Holy is he!”

Still have a question?Call 910.374.7266 or email lindsey@993architecture.com. The first conversation is free.
Schedule a consultation